CONTACT
Please use the contact form on StanleyEngineeredFastening.com
Klamp-Tite® non-structural
Aluminum alloy breakstem fasteners with a split tail formation providing a very large blind side bearing area against the rear sheet
Overview
The Avdel non-structural Klamp-Tite® aluminium rivet has a large blind-side bearing area making it an ideal rivet for use in thin sheet or low strength materials. The Klamp-Tite® rivet is also available as a structural product, containing a visible mechanical lock to give extra strength to the joint. Structural and non-structural Klamp-Tite® fasteners are ideal rivets for plastic assembly.
Key features and benefits
- Split tail formation spreads the tail bearing load/clamp load on the rear sheet
- Ideal for use in thin sheet materials offering high resistance to pull-out loads
- Multi-grip capability accommodates wide variations in material thickness
- Ideal for use in very soft or brittle materials
- Retained stem provides very strong, vibration resistant joints avoiding problems caused by loose stems
Assembly applications
- Domestic appliances
- Plastic components
- Automotive plastic assemblies
- Caravans and recreational vehicles
Specifications
- Sizes: 4.8 mm and 6.4 mm (3/16" and 1/4")
- Material: Aluminium alloy
- Headform: Protruding
| Non-structural Klamp-Tite® - Series | |||
| Material | Headform | Series | |
|---|---|---|---|
| Aluminum Alloy | Protruding head | Non-structural BAPK | |
>>> POP Avdel Breakstem Systems Catalog (7 MB)
Surface finish options
If you are looking for other surface finish options than shown in the above datasheets please download our
>>> Surface Finishes and Fastener Matrix for Breakstem Systems.
This will show you what surface finish options are possible to apply to our standard fastener types as "customer specials".
Customised Designs
We can design and manufacture breakstem fasteners with a wide variety of forms and finishes to meet your unique assembly requirements. Please refer to this page to find examples of our customised capabilities:
>>> Breakstem Fasteners & Sealing Plugs - Customised Designs
Installation Equipment
The pictures below show some Avdel® handtools and installation equipment which can be used to place Klamp-Tite® fasteners.
Tool Selection
Follow this link to find the tools suitable for your breakstem fastener:
>>> Placing Capablity Genesis® nG Tools
Nose Equipment Selection
Follow this link to find the correct nose equipment for your breakstem fastener:
>>> Nose Equipment Genesis® nG Tools
For further information on specific nose equipment, please contact your local Avdel® representative or use our tool manuals:
>>> Tool Manuals
Alternative Products
Bulbex®
Aluminum alloy breakstem fasteners with a split tail formation providing a very large blind side bearing area against the rear sheet
Klamp-Tite® structural
Klamp-Tite® rivet containing a visible mechanical lock to give extra strength to the joint.
Complementary Information
Genesis® Range
New high performance, lightweight hydro-pneumatic handtools for breakstem rivets.
